IMP-1
Deadbug Labs is a board company. We design open boards for DIY builders — IMP-1 is our pocket hardware explorer: a portable hardware exploration stack on three boards, designed end-to-end on a phone — no commercial dev kits. Buy the boards and build yours; a fully assembled unit is the done-for-you option. The prototype was built from salvaged electronics. Boards you buy are fabricated new.
> status
// 2026-11-20
Firmware: clean build — 0 errors, 0 warnings (ESP32-S3, 12 tools).
Boards: main board v11 respin complete — 18 unconnected nets, 0 clearance violations, 0 shorts; a v12 pass is under way. NFC board DRC-clean, IR board complete. Nothing fabricated yet; fabrication is gated on a clean design-rule check.
> sponsors
Sponsors are featured here the day support lands — logo, link, and credit in every build post that uses their contribution. One of the two slots on IMP-1's first fabrication run is filled; the PCB + assembly slot is still open.
PCB + ASSEMBLY
- Logo + link in this section
- Featured credit in build-log posts and videos
- Logo on the project documentation
ENCLOSURE PRINTING
- 3D-printing sponsor — USD 30 print credit
- Covers printing of the IMP-1 enclosure (case v3.5)
- Credit held until the boards are fabricated and fit-checked
To take a slot, reach out via DeadbugLabs on Facebook (see > links below).
> hardware
- ESP32-S3 — native USB
- ST25R3916B NFC front-end
- CC1101 Sub-GHz radio
- 1.47″ 172×320 colour display
- Socketed SPI flash with a physical write-protect lock
- microSD storage
- 2× 18650 cells, 1S2P — 25.9 Wh
- Enclosure — optional accessory, not the product; the prototype's shell is a salvaged Uniden Stealth LRD 767
> firmware
Twelve tools on a frozen C API, one common shell:
- Sub-GHz
- NFC
- IR
- BadUSB
- GPIO
- U2F
- Archive
- Flash Lab
- Security Auto-Audit (passive — inventory and resilience checklist for your own gear)
- RFID / iButton / 1-Wire — landing on IMP-2
Source: github.com/deadbuglabs/imp-1
> spectre
A second line, for a different night job: SPECTRE — measurement equipment for paranormal investigation. A multi-sensor hub, wireless pods, and a full-spectrum camera, all writing to one timestamped log.
SPECTRE-1 + PODS
- Full professional sensor suite — broadband EMF trio, EVP recorder, CO/CO2, Estes Mode — all logged
- Pods and POD LITE report every trigger into the hub's timestamped log
SPECTRE CAM
- Full-spectrum night camera — near-UV, visible, IR — plus THERMAL and DEPTH variants
- Shape-detection flags save the actual frame; multi-camera DVR rig mode on one hub timeline
It measures fields and records evidence; it does not detect ghosts — that line is the brand. The line: spectre.
> the_build
IMP-1 was designed end-to-end on a phone, in Termux — schematics, board layout, firmware, and this page. The parts discipline is salvaged-first: donor boards, a salvaged shell, and new silicon only where salvage can't go. The device is a multi-board stack — main board, NFC front-end board, IR board — joined by board-to-board connectors, sized to the shell it lives in.
> gallery
> links
- DeadbugLabs on Facebook
- Email imp-ai@muse.ai — orders and questions
- IMP-1 firmware on GitHub
Hardware sponsorship: open — see > sponsors above for the two open slots.
> responsible_use
Responsible use — Deadbug Labs products are tools for testing systems you own or have explicit authorization to test. Testing systems that do not belong to you, without authorization, is illegal. By purchasing, you agree to use these products only on your own systems or systems you are authorized to test, and you accept full responsibility for how you use them. Deadbug Labs is not liable for misuse.