DEADBUG LABS
1-bit imp mascot — black imp on red

IMP-1

Deadbug Labs is a board company. We design open boards for DIY builders — IMP-1 is our pocket hardware explorer: a portable hardware exploration stack on three boards, designed end-to-end on a phone — no commercial dev kits. Buy the boards and build yours; a fully assembled unit is the done-for-you option. The prototype was built from salvaged electronics. Boards you buy are fabricated new.

> status

// 2026-11-20

Firmware: clean build — 0 errors, 0 warnings (ESP32-S3, 12 tools).

Boards: main board v11 respin complete — 18 unconnected nets, 0 clearance violations, 0 shorts; a v12 pass is under way. NFC board DRC-clean, IR board complete. Nothing fabricated yet; fabrication is gated on a clean design-rule check.

> sponsors

Sponsors are featured here the day support lands — logo, link, and credit in every build post that uses their contribution. One of the two slots on IMP-1's first fabrication run is filled; the PCB + assembly slot is still open.

PCB + ASSEMBLY

SPONSOR SLOT — OPEN
  • Logo + link in this section
  • Featured credit in build-log posts and videos
  • Logo on the project documentation

ENCLOSURE PRINTING

  • 3D-printing sponsor — USD 30 print credit
  • Covers printing of the IMP-1 enclosure (case v3.5)
  • Credit held until the boards are fabricated and fit-checked

To take a slot, reach out via DeadbugLabs on Facebook (see > links below).

> hardware

> firmware

Twelve tools on a frozen C API, one common shell:

Source: github.com/deadbuglabs/imp-1

> spectre

A second line, for a different night job: SPECTRE — measurement equipment for paranormal investigation. A multi-sensor hub, wireless pods, and a full-spectrum camera, all writing to one timestamped log.

SPECTRE-1 + PODS

IN DESIGN
  • Full professional sensor suite — broadband EMF trio, EVP recorder, CO/CO2, Estes Mode — all logged
  • Pods and POD LITE report every trigger into the hub's timestamped log

SPECTRE CAM

IN DESIGN
  • Full-spectrum night camera — near-UV, visible, IR — plus THERMAL and DEPTH variants
  • Shape-detection flags save the actual frame; multi-camera DVR rig mode on one hub timeline

It measures fields and records evidence; it does not detect ghosts — that line is the brand. The line: spectre.

> the_build

IMP-1 was designed end-to-end on a phone, in Termux — schematics, board layout, firmware, and this page. The parts discipline is salvaged-first: donor boards, a salvaged shell, and new silicon only where salvage can't go. The device is a multi-board stack — main board, NFC front-end board, IR board — joined by board-to-board connectors, sized to the shell it lives in.

> gallery

> links

Hardware sponsorship: open — see > sponsors above for the two open slots.

> responsible_use

Responsible use — Deadbug Labs products are tools for testing systems you own or have explicit authorization to test. Testing systems that do not belong to you, without authorization, is illegal. By purchasing, you agree to use these products only on your own systems or systems you are authorized to test, and you accept full responsibility for how you use them. Deadbug Labs is not liable for misuse.